Some Windows users are discovering that their Event Viewer is always filled with 0XC0000035 errors pointing towards a Kernel Event Tracing Error. This problem is confirmed to occur on every recent Windows version including Windows 7, Windows 8.1, Windows 10, and Windows 11.
After investigating this particular issue, it turns out that there are a few different causes with the potential of triggering this particular error. Here’s a shortlist of culprits that might be responsible for filling your Event Viewer with 0XC0000035 errors:
- Perfdiag is modifying the Event Tracing of Windows session – The ETW session is normally for private use only by the operating system. However, various factors might have it stuck into a retry look due to some async activity. In this case, the system interprets this as an attempt to modify the Event Tracing of Windows which is why the error is thrown. In the vast majority of these cases, the error should be considered completely benign and no action should be taken to resolve it. In this case, you can hide these benign errors by modifying a few registry values using Registry Editor.
- 3rd party AV interference – As it turns out, certain 3rd party AV suites are known to cause this issue due to an overprotective active shield feature. As it turns out, this particular issue can only be resolved by disabling the real-time protection or uninstalling the 3rd party suite and replacing it with a more permissive 3rd party equivalent.
- Outdated Intel Network drivers – If you’re using the network drivers fleet for Windows, chances are this issue is being caused by some kind of interference between the Intel WI-FI driver with a sensitive kernel process. In this case, you should be able to fix the issue by using the Intel Driver & Support Assistant to update your network driver’s feet with the latest driver equivalents.
- A network issue caused by Bad IP Range or DNS Cache – Under certain circumstances, you can expect to see this issue occurring due to a bad DNS cache or in a situation where you’ve been assigned a bad IP range. In this case, you should be able to fix the issue (at least temporarily) by flushing the IP and DNS cache from an elevated Command Prompt.
Now that you are aware of every scenario that might trigger this error, let’s get over some of the methods that other affected users have used so far to fix this issue completely.
Modify the Autologg Registry key
If the error is benign and you notice that it doesn’t affect the performance or behavior of your system, you can simply prevent the 0XC0000035 error from appearing inside your Event Viewer interface.
You can do this by navigating to the registry key used by the Autologg functionality and modifying the values of Enable and EnablePropertly.
Important: While this is generally harmless and will have no effect on your computer, it might hinder you from discovering a different issue that the Event Viewer might give you clues about. If you go through with this change, remember to undo this modification whenever you need to investigate something using Event Viewer.
If you are ready to apply this fix, follow the instructions below to ensure that your Event Viewer is no longer flooded with benign 0XC0000035 errors:
- Press Windows key + R to open up a Run dialog box. Inside the Run dialog box, type ‘regedit’ and press Ctrl + Shift + Enter to open up Registry Editor with admin access.
- When you’re prompted by the User Account Control, click Yes to grant admin access.
- Once you’re inside the Registry Editor utility, use the menu on the left-hand side to navigate to the following location:
Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\WMI\Autologger\EventLog-System\{b675ec37-bdb6-4648-bc92-f3fdc74d3ca2}Note: You can either get here manually by clicking on each key individually or you can paste the full location path inside the nav bar at the top and press Enter to get there instantly.
- Once you’re inside the correct location, move over to the right-hand pane and double-click on the Enabled key.
- Inside the Edit DWORD (32-bit) Value, set the Base to Hexadecimal, then change the Value data to 0.
- Next, double-click on EnableProperly from the same key. Next, set the Base to Hexadecimal and Value data to 0. Click OK to save the changes.
- After both registry values have been interfered with, reboot your PC to make the changes permanent, then make sure to return to the same Event Viewer and see if you notice any new instances of the 0XC0000035.
If you followed the steps above and you’re still dealing with the same consistent 0XC0000035kernel errors, move down to the next potential fix below.
Disable or Uninstall 3rd party antivirus
As it turns out, a lot of affected users are blaming their 3rd party antivirus because of the constant 0XC0000035 kernel errors.
You can test out this theory by temporarily disabling the antivirus shield and seeing if the apparition of the kernel errors stops.
Test out this theory by accessing your antivirus settings and disabling the real-time protection and see if the 0XC0000035 error stops occurring.
Of course, doing this will be different from one AV tool to another, but typically you can disable the real-time virus protection directly by right-clicking ok the taskbar icon.
Unfortunately, if you discover that your 3rd party antivirus is indeed to blame, there is nothing else you can do other than uninstalling it.
Note: After you get rid of the interfering antivirus suite, the Windows Defender will take over automatically (unless you install a different 3rd party equivalent).
Follow the instructions below to get rid of the interfering 3rd party antivirus suite:
- Press Windows key + R to open up a Run dialog box. Inside the text box, type ‘appwiz.cpl’ and press Enter to open up the Programs and Features menu.
Note: If you’re prompted by the User Account Control, click Yes to grant admin access.
- Once you’re inside the Programs and Features menu, scroll down through the list of installed programs and look for the 3rd party antivirus suite that you feel is interfering with your kernel processes.
- After you locate the problematic antivirus, right-click on it and choose Uninstall from the context menu.
- Inside the uninstallation screen, follow the on-screen instructions to complete the uninstallation process.
- After the problematic antivirus is uninstalled, reboot your PC one final time and see if the problem is now fixed.
If this problem is still not resolved as you’re still seeing new instances of the 0XC0000035 error, move down to the next potential fix below.
Update your Intel Drivers
As it turns out, the 0XC0000035 error can also be caused by a severely outdated Intel Wi-Fi driver that’s interfering with a Kernel process. As it turns out, this is typically occurring if you recently upgraded from an older Windows version to Windows 11.
If the Event Viewer error references one of the following locations, it’s clear that the problem is surfacing due to an issue produced by an Intel driver issue:
- C:\Program Files\Intel\WiFi\bin\MurocApi.dll
- C:\Program Files\Intel\WiFi\UnifiedLogging\MurocLog.log
In this case, the only solution that is confirmed to fix this issue completely is to use Intel’s driver utility (Intel Driver & Support Assistant) to ensure that you’re using the latest driver version compatible with your Windows version.
Follow the instructions below to use the Intel Driver & Support Assistantutility to update your Intel’s Driver fleet to the latest versions available:
- First things first, close any non-essential application from running and see that no resource-intensive process is running in the background.
- Open your default browser and access the home page of the Intel Driver & Support assistant web utility.
- Once you’re inside the Intel Driver & Support assistant utility, wait until the initial scan is complete, then click on the Download All button at the top to download the updated driver signatures locally.
- After the download is complete, click on the Install All button (in the same place where the Download All button was previously) and wait until every driver is installed.
- Depending on the drivers that need to be updated, you might be required to follow an additional set of instructions to get these drivers installed.
- Once every driver installation is complete, reboot your computer one final time and see if the problem is now fixed.
If your Intel drivers we’re already updated to the latest or this scenario was not applicable in your particular scenario, move down to the next potential fix below.
Flush IP & DNS Cache
As it turns out, this particular issue can also be associated with an underlying network issue coming from a bad IP range or corrupted DNS cache data.
Several affected users going through the same problems and experiencing constantKernel Event Tracing (0XC0000035) events have managed to get it fixed by using elevated CMD prompts to flush both the temporary data related to the IP and DNS.
For step-by-step instructions on how to do this, follow the guide below:
- Press Windows key + R to open up a Run dialog box. Next, type ‘cmd’ inside the text box, then press Ctrl + Shift + Enter to open up an elevated Command Prompt.
- When you’re prompted by the User Account Control, click Yes to grant administrative privileges.
- Once you’re inside the elevated Command Prompt, type the following command in the same order and press Enter after each one to flush the IP and DNS cache of your PC:
ipconfig /allipconfig /Flushdns ipconfig /release /all
- Wait until the operation is complete, then close the elevated CMD prompt and restart your computer.
- Once your PC boots back up, make sure DCHP is enabled before checking if any instances of the 0XC0000035 error.
Tags
Windows
Kamil Anwar
Kamil is a certified MCITP, CCNA (W), CCNA (S) and a former British Computer Society Member with over 9 years of experience Configuring, Deploying and Managing Switches, Firewalls and Domain Controllers also an old-school still active on FreeNode.
FAQs
What is kernel event tracing? ›
Event Tracing for Windows (ETW) is an efficient kernel-level tracing facility that lets you log kernel or application-defined events to a log file. You can consume the events in real time or from a log file and use them to debug an application or to determine where performance issues are occurring in the application.
How do I fix kernel power 41 63? ›- Solution 1: Setting the Maximum Processing Power Lower.
- Solution 2: Update Your Drivers.
- Solution 3: Change Certain Power Settings in BIOS and Your PC.
The kernel power event ID 41 error occurs when the computer is shut down, or it restarts unexpectedly. When a computer that is running Windows starts, a check is performed to determine whether the computer was shut down cleanly. If the computer was not shut down cleanly, a Kernel Power Event 41 message is generated.
What is error code 0XC0000035? ›The "Error Code: 0XC0000035" is a kernel event tracing error that can be caused by a variety of things, including outdated drivers, corrupt DNS cache, or a bad IP range. There are a few different ways that you can go about fixing this error.
What is Microsoft Windows remediation? ›Windows Setup Remediations is a Windows servicing stack update. It is designed to handle Windows update functions such as freeing up space on your computer, ensuring the computer remains awake for updates and fixing any corrupt updates.
What is a kernel event? ›Events generated by the kernel (system calls) have event numbers between 1 and 2047. The event names for kernel events begin with AUE_, followed by an uppercase mnemonic for the event. For example, the event number for the creat() system call is 4 and the event name is AUE_CREAT.
How do I enable ETW tracing? ›The ETW Trace Listener supports circular logging. To enable this feature, go to Start, Run and type cmd to start a command console. In the following command, replace the <logfilename> parameter with the name of your log file. The -f and -max switches are optional.
What causes kernel power Error 41? ›Misconfigured, corrupted or even outdated drivers can cause the Kernel-Power 41 error in some cases. The ACPI driver is by far the most prevalent culprit here so start from there. What is this? You'll be greeted with the Update Driver Wizard, proceed with the “Search automatically for drivers” option.
How do I fix a kernel problem? ›- Update to the Latest Released Version of Windows 10.
- Update Drivers that Need to be Updated.
- Check for Viruses.
- Investigate Possible Corrupted Windows File System.
- Test to see if Disabling Antivirus Software Fixes the Issue.
- Investigate Possible Issues with RAM.
Faulty RAM or memory error may also cause Kernel-Power Error 41 BSOD. Some users have reported that the issue was caused due to a faulty RAM. You can run the Memory Diagnostic Tool to check problems with it.
What causes kernel error? ›
In Windows, kernel panic is typically characterized by the appearance of a BSOD error message stating that the system needs a restart. The error is usually caused by malfunctioning hardware or poorly optimized device drivers.
How do I fix error 41 on Windows? ›Fix: Kernel Power ID 41 Critical Error in Windows 11 [6 Fixes] - YouTube
How do I fix the kernel power 41 critical error? ›- Disable overclocking. If the computer has overclocking enabled, disable it. ...
- Check the memory. Use a memory checker to determine the memory health and configuration. ...
- Check the power supply. ...
- Check for overheating.
- Shut off your PSU.
- Unplug all cables from the PSU except for the main AC cable and the 24-pin cable.
- Locate pin 16 and pin 17 on your 24-pin cable. ...
- Bend your paper clip so the ends can be inserted into pin 16 and pin 17. ...
- Turn on the PSU.
- See if the PSU fan turns.
- Right-click on the application that triggered the error. ...
- Choose Properties.
- Go to the Security tab.
- Change permissions for all the Administrators, Power Users and System to Allow Full Control.
- Click Apply.
Once you're inside Event Viewer, use the ribbon at the top to click on FIle. Then, from the context menu that just appeared, click on Options. Restart your computer and see if the apparition of new instances of the 'Audit Events Have Been Dropped By The Transport. 0' event errors have stopped.
What is error 0xc0000005? ›Application Error 0xc0000005 (Access Violation) error is usually caused by your computer not being able to correctly process the files and settings required to run a particular program or installation.
Can I remove Windows Setup Remediations? ›We like to get to the point here, so the answer you're looking for is yes, you can uninstall Windows Setup Remediations, although we suggest you leave it alone. Remediation is defined as the action of remedying something, in particular of reversing or stopping environmental damage.
What is Vboxnetlwf? ›vboxnetlwf. sys's description is VirtualBox NDIS 6.0 Lightweight Filter Driver and is is digitally signed by Oracle Corporation. The file is usually located in the C:\WINDOWS\system32\drivers\ folder. This solution requires you to download the latest version of VirtualBox on your Windows 10 computer.
What is Microsoft Update health tools? ›It automatically runs in the background once the Operating System detects any problem while installing or downloading the Windows update. When Microsoft Update Health Tools detects any problem, it will reset network settings and repair any corrupted files that may stop a Windows Update.
What is a kernel error in Windows? ›
Kernel Data Inpage Error is a BSOD (Blue Screen of Death) error that indicates the kernel has requested data from the hard drive, but it couldn't read the data correctly or fast enough. It's typically caused by hardware issues (like faulty RAM), driver problems, or a damaged page file.
What is a kernel error? ›So, a kernel error occurs when Jupyter fails to connect with a specific version of Python. When the system encounters difficulties locating the path which certain programs will run, this error is known as a kernel error in Jupyter Notebook.
How do I disable kernel logger? ›...
- Click the Start Button type "msconfig" (without quotation marks) in the Search box, and then press Enter. ...
- Click the "Services" tab, check the "Hide All Microsoft Services" box and click "Disable All" (if it is not gray).
- Click the "Startup" tab, click "Disable All" and click "OK".
Many ways to disable ETW logging are publicly available from passing a TRUE boolean parameter into a nt! EtwpStopTrace function to finding an ETW specific structure and dynamically modifying it or patching ntdll! ETWEventWrite or advapi32! EventWrite to return immediately thus stopping the user-mode loggers.
What does ETW stand for? ›ETW means "Enjoy the Weekend."
How do I view a Windows etl file? ›- Open PerfView.exe.
- In PerfView, use the left pane to locate the . etl file that you want to view. ...
- Double-click the . etl file that you want to view. ...
- To view the event traces, double-click Events. ...
- To view details about a trace event, double-click the trace event.
| Description | This event is written when an application causes the system to restart, or when the user initiates a restart or shutdown by clicking Start or pressing CTRL+ALT+DELETE, and then clicking Shut Down. |
|---|---|
| Category | System |
| Subcategory | Startup/Shutdown |
The Windows kernel-mode power manager manages the orderly change in power status for all devices that support power state changes. This is often done through a complex stack of devices controlling other devices.
How do I fix critical error in Windows 7? ›- #1. Reboot PC into Safe Mode.
- #2. Use Clean Boot.
- #3. Run CHKDSK to Fix File System.
- #4. Use File System Error Checker - EaseUS Partition Master.
- #5. Run SFC Command.
- #6. Use DISM Command.
- #7. Update Disk Driver.
- #8. Run Antivirus Software.
The kernel security check failure error means that certain data files are corrupt or have failed a compatibility or integrity check. Sometimes the kernel security check failure error is caused by memory issues, malware and virus infections, corrupted system files or other problems.
How can I repair my Windows 10? ›
To run a troubleshooter: Select Start > Settings > Update & Security > Troubleshoot, or select the Find troubleshooters shortcut at the end of this topic. Select the type of troubleshooting you want to do, then select Run the troubleshooter. Allow the troubleshooter to run and then answer any questions on the screen.
How do I fix the kernel security check failure in Windows 8 and 10 blue screen? ›- Install the latest Windows Update.
- Update Device drivers.
- Use System File Checker to check and fix corrupted system files which may be the cause of the issue. Please refer to the link. ...
- Use System Restore to restore your Windows to the point before the issue persists.
To launch the Windows Memory Diagnostic tool, open the Start menu, type “Windows Memory Diagnostic”, and press Enter. You can also press Windows Key+R, type “mdsched.exe” into the Run dialog that appears, and press Enter. You'll need to reboot your computer to perform the test.
How do I fix corrupted files on Windows 10? ›- Use the SFC tool. 1.1 Run System File Checker. ...
- Use the DISM tool. ...
- Run a SFC scan from Safe Mode. ...
- Perform a SFC scan before Windows 10 starts. ...
- Replace the files manually. ...
- Use the System Restore feature. ...
- Reset corrupted Windows 10.
Kernel: As we can see, it's right in the middle of the layers. It's the core of the OS. Hardware: It's the physical machine, the base of the system. It consists of memory, the processor or the central processing unit (CPU), and input/output (I/O) components such as graphics, storage, and networking.
How do you rebuild a kernel? ›- Step 1: Download the Source Code. ...
- Step 2: Extract the Source Code. ...
- Step 3: Install Required Packages. ...
- Step 4: Configure Kernel. ...
- Step 5: Build the Kernel. ...
- Step 6: Update the Bootloader (Optional) ...
- Step 7: Reboot and Verify Kernel Version.
- Open Settings.
- Click on Update & Security.
- Click on Windows Update.
- Click the Check for updates button.
- Click the View optional updatesoption.
- Click the Driver updatestab.
- Select the driver you want to update.
- Click the Download and installbutton.
You can check the power supply on your PC by removing the side panel of its case. If you bought a prebuilt PC, you can also likely check the power supply in the computer's manual or by contacting the manufacturer. Knowing your PC's power supply can help you upgrade other parts of the computer, like your graphics card.
How do I run the troubleshooter on Windows 11? ›- Press Win+I to open the Windows Settings panel.
- Make sure that you are in the System tab.
- Click on the Troubleshoot menu on the right side.
- Click on the Other troubleshooters option.
- Find the Power troubleshooter and click the Run button.
- Follow the screen's instructions.
Please note: To reset the power supply you need to turn it Off first (On/Off switch to “O” position) and then after waiting a short while, turn it back on again (On/Off switch to “I” position) If your power supply still does not function properly, you can check its functionality by yourself with a simple 'paperclip' ...
What are the signs of motherboard failure? ›
Common symptoms of motherboard issues are similar to CPU problems: The system does not display anything; an error code appears; one or more beeps occur; the system locks; the system reboots; a Windows BSOD (blue screen of death) appears; or one or more of the ports, expansion slots, or memory modules fails.
What causes PSU to fail? ›The main killer for a PSU is dirtiness. Physical dirt can clog fans and coat heatsinks which will impair heat dispersal and can cause premature component failure. Dirty mains power will damage components slowly over time or all at once, over and undervoltages can be ruinous to parts.
How do you fix audit events have been dropped by the Transport 0? ›Once you're inside Event Viewer, use the ribbon at the top to click on FIle. Then, from the context menu that just appeared, click on Options. Restart your computer and see if the apparition of new instances of the 'Audit Events Have Been Dropped By The Transport. 0' event errors have stopped.
How do I fix Event ID 41? ›...
To help isolate the problem, do the following steps:
- Disable overclocking. ...
- Check the memory. ...
- Check the power supply. ...
- Check for overheating.
If your computer doesn't have the necessary hardware to log on with Windows Hello, the Event Viewer may constantly show the “Windows Hello for Business will not be launched” error. In this case, you can try disabling the Log Provider for Windows Hello.
What is error 0xc0000188? ›As stated before, another quite common cause of Windows users losing their display and having “Session 'Circular Kernel Context Logger' Stopped Due to the Following Error: 0xc0000188” error messages in their Event Viewer is the size of the Startup Event Trace Sessions not being adequate.
Can RAM cause kernel power 41? ›Faulty RAM or memory error may also cause Kernel-Power Error 41 BSOD. Some users have reported that the issue was caused due to a faulty RAM. You can run the Memory Diagnostic Tool to check problems with it.
How do I fix error 41 on Windows? ›Fix: Kernel Power ID 41 Critical Error in Windows 11 [6 Fixes] - YouTube
How do I fix a kernel problem? ›- Update to the Latest Released Version of Windows 10.
- Update Drivers that Need to be Updated.
- Check for Viruses.
- Investigate Possible Corrupted Windows File System.
- Test to see if Disabling Antivirus Software Fixes the Issue.
- Investigate Possible Issues with RAM.
Find the “Configure Windows Hello for Business” option and select “Disable”. Wait 10 - 15 minutes for your devices to pick up the policy change. Reboot the device and Windows hello should now be disabled.
Can you disable Windows Hello? ›
Click on Start > Settings > Account > Sign-in options. Click on Windows Hello Pin on Windows 10 or PIN (Windows Hello) in Windows 11. Click on Remove. In some cases, if you have a Windows Hello pin set up, you can't remove the option unless you choose one of the other available sign-in options.
How do I turn off Windows Hello registry? ›...
1] Using the Settings app
- Go to Settings > Accounts > Sign in options.
- Click Windows Hello PIN.
- Click on the Remove button.
- After that follow the on-screen instructions.