A damaged USB charging cable may not make good contact with the USB port on your device. This can be caused by bare wire, damaged insulation, and corrosion. Fortunately, there are ways to detect if your USB port is damaged. For example, you can check the cord to find if it’s rusted or stripped.
Many phone scratches and charging woes result from a damaged USB charger port. So how do you know if the port is wrong or not? There are several ways to tell, but the easiest way to test it is by plugging in your charger and seeing if your device will charge successfully. If you find that this doesn’t work, try plugging your charger into another device, like an iPad or computer. If an iPad can charge successfully but your phone cannot, then there must be something wrong with the USB charging port on your phone.
Some people opt to replace their damaged USB charging port with a more expensive alternative rather than purchasing a replacement cable. However, this is unnecessary, and the replacement cable should work fine (as opposed to an expensive USB charging port).
If you find that your phone is only charging when a certain amount of pressure is put on the USB charger, then there must be something wrong with your phone. In this case, you are stuck buying a new charging cable and possibly a new USB charger port.
Some people have reported that their phone only charges appropriately at a certain angle. This can be due to a lousy USB charger port or some other issue that may require you to get your phone checked out by an Apple technician.
If the outlet you are using for your USB charging ports is broken or damaged, this can also cause problems with charging. In this case, a replacement outlet port can fix the problem.
If your phone only charges when certain specific apps are open, you may have a hardware issue with your phone’s internal components. In this case, you will need to get an iPhone technician to check out your phone and ensure that nothing is wrong internally that could prevent it from charging correctly.
If your iPhone only charges when driving down the road, this may be due to an electrical problem with your car. However, given the nature of iPhones and their poor battery life, you really shouldn’t expect them to be able to last for very long when connected to a car outlet.
Phones that have moisture damage will often not charge correctly or at all. If your phone doesn’t charge when it has moisture damage, you’ll need to get an iPhone technician to check out its internal components and ensure there is no permanent damage.
In some rare cases, if your iPhone isn’t charging correctly, you may have a problem with your SIM card.
A Damaged USB Charging Cable
If your USB charger isn’t working, you might have a damaged cable. Damaged cables will have exposed wire or stripped insulation and wire shielding. You can check this by plugging the charger into another device and seeing if the problem persists. If it does, you should consider getting a new cable.
Generally, a USB cable consists of four wires, although newer models have eight wires. The inner wiring is made from four different colors. If one color is exposed, you should carefully twist it tightly. If you cannot do this, you can cover the metal with electrical tape.
A damaged USB charging cable sometimes won’t make good contact. This can be caused by the cable being dirty. If you try to clean the cable, you may damage the pins inside. Be careful when cleaning a USB cable because it can cause an electrical shock or even a minor explosion. This can damage the device or the user.
Another sign that a USB charging cable is damaged is that the wires inside the charger are bent. This happens when the cable is repeatedly plugged and unplugged. If the wires are bent, the USB cable won’t be able to operate correctly. In some cases, the cable can break because the wires are crimped.
A USB charging cable’s quality should be checked before purchasing it. Low-quality cables will likely damage devices due to their shoddy construction and poor materials. Cheap ones are made with thin wires and cannot withstand frequent bending. They also often feature loose plugs and sockets. These can lead to poor connection and overheating.
A damaged USB cable can cause your device to stop charging. The cable may not be MFI certified, or its controller chip may not be able to handle the current. It may only work with 5 volts or less. Some cheap cables can be damaged due to sunlight, heat, or excessive current.
Another way to tell if your cable is damaged is by comparing the current it puts out. A USB charging cable with a similar output current is healthy. If it is different, it is defective. Try comparing it with another charger or cable for your smartphone. You should use different measurements if you’re using the charger with quick charging.
There are several ways to tell if your charging port is damaged by bare wire. First, if the wires are damaged, a spark should be produced when you touch them together. If the spark is not present, you can use needle-nose pliers to reshape them or soldering iron.
You should strip the protective shielding and rubber if the wires are exposed. This will reveal bare metal wires connecting the two parts of the charging cable. The white and black wires are connected with the bare metal wires. If the wires are not exposed, they will short out when they touch each other.
If the wires are damaged, you should not charge your phone with them. This will result in an electrical shock. Instead, it would help if you tried disconnecting the damaged charging cable from a working outlet. Make sure to disconnect any extra components from the charger first. If the charger works correctly, then you can add them back. However, it would help if you were careful when wiggling the cable since you may cause an electrical shock.
If you have a laptop and find that your charging port isn’t working, it may be time to replace the insulation. There are two ways to repair this problem: repair it at home yourself or take it to a repair shop. Here are the steps you should take:
First, you must check the wires. You should find the red and black wires at the charger head. These wires are responsible for transmitting power and data. If they are stripped or damaged, you can fix them using a soldering iron. Make sure that you don’t cut the wires inside the casing.
One of the most common problems with your smartphone is a damaged charging port. This can happen for several reasons. The charging port may erode if your smartphone is constantly in water or a high humidity environment. Debris from the port can also clog the contacts, making it difficult for the phone to charge. Cleaning the charging port should clear any debris.
If you notice that the charging cable is not fitting into the charging portal, the charging port has likely been damaged. The charging portal is made up of pins that fit into the charging cable, and if the pins are damaged, the phone won’t charge properly.
You should be able to spot corrosion before it leads to permanent damage. Then, depending on your plan, you may be able to charge your device again without incurring additional fees. However, if the damage has already occurred, it will be too late to apply any simple solutions. In addition, the damage is often permanent and cannot be repaired.
Many things can cause a broken charger port, such as: Water damage: If your phone gets wet, the water can cause corrosion and damage to the charging port. Dust and debris: Over time, dust and debris can build up in the charging port and eventually cause damage.What causes charging port to fail? ›
Dirt and debris can enter the charging port and cause the charger not to connect completely with the phone. Get a light source and look into your phone's charging port. If you find visible dirt and debris, get a soft toothbrush and use it to clean the phone charging port.How do I clean my charging port? ›
- Turn off your phone.
- Gently insert the toothpick into the port and move it around in a circular pattern to loosen the debris.
- Inspect the port with a bright light, while using the toothpick to carefully remove any loose debris.
The charge port is damaged or something is blocking the connection. Sometimes, you just may need to have a technician carefully clean your charging port. Other times a full repair or replacement may be needed.How long does a charging port take to fix? ›
Most phone charging connector port faults can repaired for $40.00 and takes only 15 minutes! This is because 90% of them don't actually need replacing and can be repaired by giving them a deep clean.How do I know if my charger port is clean? ›
Finding out if you have a dust problem is quite easy – simply shine a light into the port where the cable connects and take a look. If you cannot see the metal charging contacts, or lint and dust is clearly visible, you need to clean the port.Can dropping a phone damage the charging port? ›
Charging Port Problems
There's a high chance of experiencing charging issues if your phone was plugged in when it dropped. This is usually due to charging port or phone battery damage.
If you charge your iPhone while the Lightning port is wet, the pins on the Lightning port or the cable can corrode and cause permanent damage or stop functioning, causing connectivity issues for your iPhone or accessory. Although you shouldn't charge your iPhone when it's wet, you might need to in an emergency.Can I clean my phone charging port? ›
Use a soft cotton swab to clean out your charging port. You can also try a bulb syringe to remove and loosen debris. According to Apple, don't use any abrasive cleaners like bleach or hydrogen peroxide. Avoid getting any moisture inside your phone as well.Is it expensive to fix a charging port? ›
Expect to pay between $5 and $100 for a new charging port, depending on your iPhone model. Most are sold as charging port/flex cable assemblies, which are easier to replace than standalone charging ports because they don't need soldered. Toolkits start at $5 if you don't already have the tools you need. What is this?
- Use a USB Port to Charge Your Phone.
- Charge Your Phone With a Battery Pack.
- Hand-Crank Chargers for Emergency Phone Charges.
- Use an Eco-Friendly Solar-Powered Charger.
Troubleshoot your cable, charger, outlet & case
Check that your charger and cable work. Try them with another device. Check that the cable is securely connected to the charger and to your phone. Check that there's nothing in the port of your phone, like dust or lint.
At iRepairIT, a charging port cleaning only costs $25. And if our technicians find that the cleaning wasn't the issue, and you still need to replace the charging port, the $25 you paid for the cleaning go towards the replacement. Easy-peasy.Can I use a pin to clean my charging port? ›
Wet, hot air from your mouth isn't safe for the port and its points of contact. Beware of putting chemicals, cleaning supplies, or sharp objects like pins or metal rods into your iPhone's charging port too. Doing so could damage the internal machinery, made up of tiny metal lines, experts say.How do you clean USB ports? ›
Turn off your device and use the can of compressed air or the bulb syringe to clean out the charging port. Blast a few short bursts and see if any dust falls out. If using compressed air, make sure you're holding the can upright to avoid getting water inside the port.Why is my phone charging slowly? ›
The most common reason for a slowly charging phone is the easiest to troubleshoot, and faulty connections should be one of the first things that you check. Oftentimes, the power adapter isn't fully plugged into the wall socket, or the cable has come loose either at the adapter port or the phone port.Does charging port affect battery life? ›
Computer USB ports usually do not produce enough charge to match the needs of the phone battery. If you are charging from a USB port and also operating some battery draining applications like games and Google sync, then you may experience your battery decreasing while you are charging.Can I use a fan to dry my charging port? ›
If you want to speed up the drying process of your phone's USB port, we recommend placing it in front of a fan or even near an open window (if you're sure it's not going to rain!).How do I clean my iPhone charging port? ›
Using a can of compressed air is the safest way to clean your iPhone's port. Hold the can upright but not too close to the port, and apply a few short blasts of air. You should see small particles falling out of the phone charging port. This is also an option if you need to clean your AirPods and AirPods case.How can I charge my phone myself? ›
- Repeat a previous recharge: Under the amount, tap Repeat recharge.
- Pay a custom amount: Tap Search. . Enter the amount that you'd like to recharge. This option might not be available for all mobile operators.
- Choose a plan: Tap a plan from the options.
Battery Turbo Charger is a fast charging app that helps reduce the waiting time for battery charging.How do I clean the charging port on my iPhone? ›
Using a can of compressed air is the safest way to clean your iPhone's port. Hold the can upright but not too close to the port, and apply a few short blasts of air. You should see small particles falling out of the phone charging port. This is also an option if you need to clean your AirPods and AirPods case.