[SOLVED] How to Fix a Broken USB Stick and Recover Data (2023)

Have you ever inserted a USB stick into your PC or laptop, only to find it unreadable by your system? At that point, you might be wondering how to recover information from a broken flash drive? Before we answer that question, you should know there are a lot of reasons why this can happen, but there’s generally one term applied to that unfortunate state your card has fallen prey to — RAW.

[SOLVED] How to Fix a Broken USB Stick and Recover Data (1)

When a flash device is found as RAW, it means, for whatever reason, the file system is damaged. Fortunately, you have a few options that can lead you to recover that data from a damaged USB drive. Let’s find out how we can take a RAW card/stick and recover any data found inside.

How a USB Stick Gets Damaged

There are a number of ways a USB stick can become damaged. One of the most common paths to an unreadable card is when it’s been removed from a computer or laptop, without first safely ejecting the device. Do this once or twice, and you might be lucky. Continue removing a card/stick without properly ejecting it from the operating system and the chances of the file system being unreadable increase exponentially.

Other reasons why cards and sticks become damaged include:

  • 🦟 Virus or malware.
  • 💾 Misoperation of the storage medium.
  • 💿 Formatting failure.
  • 🔌 Hardware malfunction.
  • ⚡ A power surge or outage.
  • 🚰 Water damage.
  • 💀 Physical damage (bent or broken).

Clearly, there are a number of ways those cards and sticks can get damage. But how do you recover the data? Let’s find out. First, let’s look at methods for fixing a RAW USB device.

Different Solutions for Fixing RAW USB Drive

There are a number of ways to fix a RAW USB device. Some of those methods include the following:

Problem Solution
Fix Raw USB Drive Format the SD/USB device
Fix Unreadable USB Change the Drive letter of the USB device
Fix USB device not showing Create a new volume on the USB device
Fix Broken USB port Clean the port
Fix USB drive not detected Install drivers
Fix bent USB Try to reshape it
Fix infected USB Run malware scan
Repair corrupted USB Repair corruption
When all else fails Use a data recovery service
Recover files from a RAW drive Use a data recovery software

How to Fix a RAW USB Drive

In order to fix a Raw USB drive, you must format it. In Windows, follow these steps:

  1. Insert the USB device into the PC or laptop.
  2. Open the file manager.
  3. Right-click the entry for the RAW drive.
  4. Click Format.[SOLVED] How to Fix a Broken USB Stick and Recover Data (2)
  5. Select either FAT32 or NTFS from the File system drop-down.
  6. Give the device a name (label).
  7. Click Start.[SOLVED] How to Fix a Broken USB Stick and Recover Data (3)

How to Recover Files from a RAW Partition →

How to Fix an Unreadable USB Drive

Your USB drive might be unreadable, because of the assigned letter drive. To remedy this, insert the SD/USB device and change the drive letter by following these steps:

  1. Press the Windows key + X key combination.
  2. Click Disk Management.[SOLVED] How to Fix a Broken USB Stick and Recover Data (4)
  3. Right-click on the USB stick entry.
  4. Click “Change Drive Letter and Paths.”[SOLVED] How to Fix a Broken USB Stick and Recover Data (5)
  5. Click “Add”.[SOLVED] How to Fix a Broken USB Stick and Recover Data (6)
  6. Click the drop-down associated with Assign the following Drive letter.
  7. Select the desired drive letter.[SOLVED] How to Fix a Broken USB Stick and Recover Data (7)
  8. Click Ok to save the changes.

How to Fix a USB Drive Not Showing

If your USB device isn’t showing up, you can fix this by inserting the USB device and creating a new volume on the device. Do by following these steps:

  1. Press the Windows key + X key combination.
  2. Click Disk Management.
  3. Click the entry for the RAW device.[SOLVED] How to Fix a Broken USB Stick and Recover Data (8)
  4. Right-click the Unallocated portion of the device in the bottom pane.
  5. Click New Simple Volume.[SOLVED] How to Fix a Broken USB Stick and Recover Data (9)
  6. Follow the user-friendly wizard.

How to Fix USB Flash Drive not Showing up on Mac →

How to Fix a Broken USB Port

If your USB port is not working you could try blowing canned air into the port to see if that solves the problem. If not, the port might have to be replaced (which means a trip to your local PC repair shop).

[SOLVED] How to Fix a Broken USB Stick and Recover Data (10)

How to Fix an Undetected USB Drive

If your USB device requires the installation of special drivers, so it can be used by your operating system, you might need to re-install those drivers. For this you’ll need to download the drivers from the device manufacturer and install them as you would any application.

How to Fix a Bent USB Device

[SOLVED] How to Fix a Broken USB Stick and Recover Data (11)

If your USB port is bent or broken and you cannot manually repair it, you’ll probably have to buy a new PC (if it’s the PC port) or USB device (if it’s the USB device that’s bent or broken).

If your USB stick is bent, you can try to carefully bend it back into shape. Use caution with this method. If you apply too much force, you could snap the circuit board inside, rendering your data unrecoverable.

How to Fix a USB Drive Infected With Malware

When a USB flash drive becomes infected with malware, it becomes unreliable and unreadable. What’s even worse is that a malware-infected USB flash drive can spread the infection to other devices, creating a devastating chain of data loss.

To check if your USB drive is really infected, you can use Windows Security:

  1. Open the Start menu and search for “Windows Security.”
  2. Select the Windows Security app.[SOLVED] How to Fix a Broken USB Stick and Recover Data (12)
  3. Go to Virus & threat protection.
  4. Choose Scan options.[SOLVED] How to Fix a Broken USB Stick and Recover Data (13)
  5. Select the Custom scan option.
  6. Click Scan now.[SOLVED] How to Fix a Broken USB Stick and Recover Data (14)
  7. Select your USB flash drive and click Select Folder.
  8. Wait for the scan to finish.
  9. Remove any threats found by the Windows Security app.

We also recommend you format the USB flash drive using the instructions provided earlier in this article. That way, you will definitely get rid of even the most persistent malware.

How to Fix a Corrupted USB Drive

A USB flash drive can become corrupted for many different reasons, including improper removal, software bugs, and power surges/outages.

Often, USB flash drive corruption triggers the “Repair this drive” window, which presents a convenient option to find and repair file system errors. Alternatively, you can tell Windows to repair the flash drive manually, by following these steps:

  1. Open File Explorer.
  2. Go to This PC.
  3. Right-click the corrupted USB flash drive and choose the Properties option.[SOLVED] How to Fix a Broken USB Stick and Recover Data (15)
  4. Navigate to the Tools tab.
  5. Click Check.[SOLVED] How to Fix a Broken USB Stick and Recover Data (16)
  6. Select the Scan and repair drive option.
  7. Wait for the Error Checking tool to repair your drive.

To avoid similar problems with USB drive corruption in the future, we recommend you always safely remove your drive before physically disconnecting it from your computer.

(Video) How to Fix Corrupted USB Flash Drive and Recover Data?

When All Else Fails

Data recovery specialists are remarkably adept at salvaging data, even from disks and devices that might seem too far gone for recovery. If you don’t have anyone in your city who specializes in data recovery, you can also take the task to an online service. There are quite a few such services, such as the CleverFiles Data Recovery Center, that can help you recover data from a seemingly impossible situation.

How to Recover Data from a RAW USB Drive

If you’re looking to know how to recover files from a broken flash drive, you’ve come to the right place. To recover data from a RAW USB device, you have options. One of the best options for broken flash drive data recovery is to make use of third-party software. One such tool is Disk Drill. Let’s find out how to get files off a broken flash drive with this tool.

Step 1. Download and install Disk Drill USB data recovery tool.

Step 2. Insert the USB device into your PC or laptop.

Step 3. Open Disk Drill and click on the entry for the damaged or unrecognized USB device.

[SOLVED] How to Fix a Broken USB Stick and Recover Data (18)

Step 4. Select All recovery methods from the drop-down on the right side of the window and click Search for lost data.

Step 5. Allow Disk Drill to run and finish the scan of the USB device. If you pause or stop the scan before completion, you reduce the chances of a complete data recovery. Depending on how large your drive is, how much data is/was on it, and the speed of your computer, this scan could take some time.

💡 NOTE: If the drive was accidentally reformatted, Disk Drill will first search for and recover a lost partition.

Step 6. When the scan completes, Disk Drill might offer the opportunity to find even more data. If you find Disk Drill didn’t locate the number of files you expected to recover, click Scan entire disk and allow the tool to run a full scan of your USB device.

[SOLVED] How to Fix a Broken USB Stick and Recover Data (19)

Step 7. When the scan completes, click Review found items.

Step 8. Expand each entry, under Found files, for all three types: Deep Scan, Found files, and Reconstructed, and Reconstructed. Keep expanding until you find the files you’re looking for. Before you select each item to recover, right-click the item in question and select Preview (or hover over the file listing and click the eye icon). If you find the file preview appears as expected, go ahead and click the associated checkbox for that item. Continue previewing and selecting files until you have all of them checked.

[SOLVED] How to Fix a Broken USB Stick and Recover Data (20)

Step 9. Once all files are selected for recovery, click Recover.

Step 10. Select a location to house the recovered files. Do not select a destination that is the same drive as that which you are recovering from.

[SOLVED] How to Fix a Broken USB Stick and Recover Data (21)

Step 11. Click OK and Disk Drill will recover the found files to the selected destination..

Congratulations, you’ve successfully recovered files from a broken or unreadable USB device.

How to Recover Data from a USB Drive on Mac →

Conclusion

If you’ve found that, no matter what you do, you cannot recover the files from that USB device, you’re not completely out of options. If the data on that card or stick is irreplaceable, and you must get it back, you can also take that device to a person or company that specializes in data recovery.

(Video) How to Fix Bent or Broken USB Flash Drive Connector and recover data

Read also

Sandisk USB Flash Drive Recovery
How to Recover a Formatted USB Drive
How to Fix Corrupted USB Drive on Mac
USB Stick Recovery Software for macOS

FAQ

Can you recover files from a broken flash drive?
Can a damaged flash drive be repaired?
How do you fix a physically broken flash drive?
How much does it cost to repair a broken flash drive?
Why is my USB stick not working?
How do you fix a USB that won't open?
Why can't I see my USB drive in Windows 10?
(Video) How to Easily Recover Lost Files from Corrupted USB Drive ?

[SOLVED] How to Fix a Broken USB Stick and Recover Data (26)

Jack Wallen

Jack Wallen is an award-winning writer for TechRepublic, ZDNet, TechTarget and Linux.com.

Read full bio

Jack Wallen is an award-winning writer for TechRepublic, ZDNet, TechTarget and Linux.com.

Read full bio

[SOLVED] How to Fix a Broken USB Stick and Recover Data (27)

Approved by

Brett Johnson

This article has been approved by Brett Johnson, Data Recovery Engineer at ACE Data Recovery. Brett has a Bachelor's Degree in Computer Systems and Network, 12 years of experience.

(Video) How to Fix Corrupted USB Drive without Losing Data? [2022]

This article has been approved by Brett Johnson, Data Recovery Engineer at ACE Data Recovery. Brett has a Bachelor's Degree in Computer Systems and Network, 12 years of experience.

Videos

1. flash drive repair and data recovery
(HDD Recovery Services)
2. What I fix daily - Broken USB stick data recovery
(Paul Daniels)
3. How to fix a Fault USB Flash Drive & recover data / create a traditional keepsake from USB Flash
(INVENTOR GEANT)
4. How to Repair a Broken USB Stick or Flash Drive
(Brassic Gamer)
5. How to recover lost data from broken USB flash drive
(HDD Recovery Services)
6. How to Fix Broken USB Flash Drive Connector and recover data
(technical zone)
Top Articles
Latest Posts
Article information

Author: Nathanael Baumbach

Last Updated: 12/25/2022

Views: 5738

Rating: 4.4 / 5 (75 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Nathanael Baumbach

Birthday: 1998-12-02

Address: Apt. 829 751 Glover View, West Orlando, IN 22436

Phone: +901025288581

Job: Internal IT Coordinator

Hobby: Gunsmithing, Motor sports, Flying, Skiing, Hooping, Lego building, Ice skating

Introduction: My name is Nathanael Baumbach, I am a fantastic, nice, victorious, brave, healthy, cute, glorious person who loves writing and wants to share my knowledge and understanding with you.